0 of 4 remaining
Date(s) - 06/19/2017 - 06/21/2017
5:00 pm - 7:00 pm
Registration is open until 06/09/17 at 3:30pm.
This camp is design to explore robotics through the construction of a rolling robot. We will look at different programming methods for the Arduino microcontroller. The robot is also designed so that the circuitry can be rearranged in order to encourage further exploration at home.
You get 2 hours of class time per day over 3 days. Class time will be broken down into two 45 minute sessions with a 15 minute break in between.
Day 1 – We start with classroom time then go on to construction.
Day 2 – Arduino IDE based programming class.
Day 3 – Testing and troubleshooting.
Suggested Age Group:
10 and up
We will need at least 2 makers. If we get less than 2 and we have to cancel we will refund the registration cost. Class size is limited to 6 makers so each maker will get the most out of the experience.
Kit and all supplies needed for the build are included. There will also be tools available for use during the build.
- Arduino Microcontroller
- (2) DC Gearmotors
- 3D Printed Body
- Battery Pack
- Power Switch
- Screws and Related Hardware
What to Bring:
A laptop if you have one and a snack if you would like one during the break.
Our brand new location at 327 Dahlonega St. #202B, Cumming GA 30040.
No more seats available for this event.